Outdoor Digital Billboard High-Brightness Display Case

Outdoor Digital Billboard High-Brightness Display Case

프로젝트 소개

Industry / Application: Outdoors Digital Billboard

고객 유형: Outdoor Advertising Media Company

프로젝트 규모: 15 sets of full-laminated high-brightness display modules

고객 불편 사항: The previous ordinary LCD modules were easily washed out by sunlight, hard to read outdoors, and their service life was short. High-temperature operation also caused the modules to burn out frequently, leading to after-sales problems.

Demo – Outdoor Billboard Case

프로젝트 세부 정보

클라이언트 배경

— Client Background

The customer operates outdoor advertising screens installed along busy streets and commercial districts. The displays run continuously in full sunlight, exposed to high temperatures, UV radiation, wind, rain and condensation.

The previous supplier used ordinary commercial LCD panels that were not designed for outdoor use. The images faded in bright sun, polarizer layers aged quickly under heat, and several screens failed within the first year of operation.

— Solution Provided

01
Touch display matched to the terminal's landscape layout
A 4.3-inch IPS TFT panel with 480 x 800 resolution, 16.7M colors and 80/80/80/80 viewing direction. The panel is a portrait-format part that is mounted in landscape orientation in the streaming terminal, so the interface stays readable from the operator's position and from the audience side of the device.
02
Capacitive touch built for continuous operation
A G+F+F capacitive touch stack with a 0.7 mm cover lens, 6H surface hardness and transmittance of 87% or above, delivering the scratch resistance and light transmission required by a device that is touched for hours at a time.
03
Compact high-speed interface
A 2-lane MIPI DSI interface keeps the pin count low while supporting the 480 x 800 resolution, which simplifies the FPC and the connector layout inside a slim consumer terminal.
04
맞춤형 기계 통합
Module size of 66.26 x 113.9 x 3.35 mm with an active area of 56.16 x 93.6 mm; the cover glass outline, printing and interface configuration are matched to the customer's product so the display integrates into the existing front panel.
05
Environmental and reliability design
Operating temperature -20 degC to +70 degC, storage -30 degC to +80 degC, 8 white LED serial backlight, and RoHS-compliant material selection.

— Final Delivery

Product parameters and delivery specifications
매개 변수 스펙
모듈 번호 CH430WV15A-CT
LCD 유형 4.3-inch TFT with capacitive touch
점 배열 480 x (RGB) x 800 dots
색상 16.7M
디스플레이 모드 IPS / 투과형 / 일반적으로 검정색
시청 방향 80/80/80/80 (ALL)
명암비 800:1
모듈 크기 6.26 (W) x 113.9 (H) x 3.35 (T) mm
활성 영역 56.16(폭) x 93.6(높이) mm
도트 피치 0.117 X 0.117 mm
인터페이스 2레인 MIPI DSI
터치 타입 Capacitive, G+F+F, I2C interface
터치 표면 Cover lens 0.7 mm, hardness 6H, transmittance 87% or above
역광 8 white LEDs in serial; typical 300 cd/m2, uniformity 80%
작동 온도 -20도C ~ +70도C
보관 온도 -30도C ~ +80도C
보관 습도 20 ~ 90 % RH
규정 준수 RoHS 준수
배송 양식 Customized module with customer-matched cover glass and interface configuration
테스트 및 검증
시험 항목 상태
고온 보관 80 +/- 2 degC x 96 hours
저온 보관 -30 +/- 2 degC x 96 hours
고온 작동 70 +/- 2 degC x 96 hours
Low temperature operating -20 +/- 2 degC x 96 hours
Thermal cycle (storage) -20 degC (30 min) / 25 degC (5 min) / 70 degC (30 min), 10 cycles
Damp proof test (storage) 50 +/- 5 degC, 90% RH x 96 hours
진동 테스트 10 Hz - 55 Hz - 10 Hz, amplitude 1.5 mm, X / Y / Z axes, 3 hours total (packing condition)
낙하 시험 1 m drop, one time per carton side (packing condition)
ESD 테스트 +/- 8 kV, air mode, 10 times
Acceptance after each test: no air bubbles in the LCD, no seal leak, no non-display or missing segments, no glass crack, current within twice the initial value, surface free from damage, and electrical characteristics within specification. Outgoing inspection follows MIL-STD-105D Level II sampling with AQL limits defined for major and minor defects.
프로젝트 결과
프로젝트 결과
프로젝트 결과
프로젝트 결과
프로젝트 결과

— Project Results

  • The customized configuration was frozen as a released specification (V0) covering the display, touch stack, interface and mechanical outline, so the module can be reordered against a controlled document.
  • The module passed the full reliability sequence above, including 96-hour high and low temperature storage, 96-hour operating tests, 10 thermal cycles, damp proof testing, vibration, carton drop and +/- 8 kV air discharge ESD.
  • Material selection complies with RoHS, which the customer's product compliance file requires.
  • The same 4.3-inch touch display platform is also used in other equipment categories, which keeps the supply chain and the engineering base common across products.

고객의 소리

"The touchscreen is operated continuously during a live session, so responsiveness is not a nice-to-have.

The panel keeps up with fast tapping over hours of use, and we have not had touch complaints from users."

제품 관리자
제품 관리자
라이브 스트리밍 장비 제조업체

"We mount this panel in landscape, and the full viewing angle is what makes it work:

the interface stays readable whether the user is standing at the terminal or watching from the side."

하드웨어 엔지니어
하드웨어 엔지니어
가전​​ 제품
"The cover glass was made to our outline, so the display sits flush in the front panel without a separate bezel. That saved us a tooling change."
산업 디자이너
산업 디자이너
라이브 스트리밍 장치

관련 사례

No related cases.

LCD 모듈을 맞춤 제작할 준비가 되셨나요? 함께 만들어 볼까요?

크기, 인터페이스, 밝기, 터치 등 귀하의 요구 사항을 알려주시면 저희 팀에서 빠른 지원과 공장 직접 가격 책정을 통해 맞춤형 솔루션을 제공해 드립니다.

무료 견적 및 상담을 원하시면 저희에게 연락하세요.

문의하기

요청 A 견적

*당사는 귀하의 개인정보를 존중합니다. 귀하가 연락처 정보를 제출하시면 당사는 당사의 규정에 따라서만 귀하에게 연락하는 데 동의합니다. 개인 정보 보호 정책.

우리는 수집되는 개인정보 보호를 위해 최선을 다하고 있습니다.

당사는 귀하의 브라우징 경험을 개선하고, 개인화된 광고나 콘텐츠를 제공하고, 당사의 트래픽을 분석하기 위해 쿠키를 사용합니다. "모두 수락"을 클릭하면 당사의 쿠키 사용에 동의하는 것입니다.