Outdoor Digital Billboard High-Brightness Display Case

Outdoor Digital Billboard High-Brightness Display Case

Introduction du projet

Industry / Application: Outdoors Digital Billboard

Type de client: Outdoor Advertising Media Company

Échelle du projet : 15 sets of full-laminated high-brightness display modules

Point sensible du client : The previous ordinary LCD modules were easily washed out by sunlight, hard to read outdoors, and their service life was short. High-temperature operation also caused the modules to burn out frequently, leading to after-sales problems.

Demo – Outdoor Billboard Case

Détail du projet

Contexte client

— Client Background

The customer operates outdoor advertising screens installed along busy streets and commercial districts. The displays run continuously in full sunlight, exposed to high temperatures, UV radiation, wind, rain and condensation.

The previous supplier used ordinary commercial LCD panels that were not designed for outdoor use. The images faded in bright sun, polarizer layers aged quickly under heat, and several screens failed within the first year of operation.

— Solution Provided

01
Touch display matched to the terminal's landscape layout
A 4.3-inch IPS TFT panel with 480 x 800 resolution, 16.7M colors and 80/80/80/80 viewing direction. The panel is a portrait-format part that is mounted in landscape orientation in the streaming terminal, so the interface stays readable from the operator's position and from the audience side of the device.
02
Capacitive touch built for continuous operation
A G+F+F capacitive touch stack with a 0.7 mm cover lens, 6H surface hardness and transmittance of 87% or above, delivering the scratch resistance and light transmission required by a device that is touched for hours at a time.
03
Compact high-speed interface
A 2-lane MIPI DSI interface keeps the pin count low while supporting the 480 x 800 resolution, which simplifies the FPC and the connector layout inside a slim consumer terminal.
04
Intégration mécanique personnalisée
Module size of 66.26 x 113.9 x 3.35 mm with an active area of 56.16 x 93.6 mm; the cover glass outline, printing and interface configuration are matched to the customer's product so the display integrates into the existing front panel.
05
Environmental and reliability design
Operating temperature -20 degC to +70 degC, storage -30 degC to +80 degC, 8 white LED serial backlight, and RoHS-compliant material selection.

— Final Delivery

Product parameters and delivery specifications
Paramètre Spécifications
Module No. CH430WV15A-CT
Type d'écran LCD 4.3-inch TFT with capacitive touch
Disposition des points 480 x (RGB) x 800 dots
Couleur 16.7M
Mode d'affichage IPS / Transmissif / Normalement noir
Direction de visualisation 80/80/80/80 (ALL)
Rapport de contraste 800:1
Taille du module 6.26 (W) x 113.9 (H) x 3.35 (T) mm
Zone active 56.16 (L) x 93.6 (H) millimètre
Point de dot 0.117 x 0.117 mm
Interface MIPI DSI à 2 voies
Type de contact Capacitive, G+F+F, I2C interface
Surface tactile Cover lens 0.7 mm, hardness 6H, transmittance 87% or above
Rétro-éclairage 8 white LEDs in serial; typical 300 cd/m2, uniformity 80%
Température de fonctionnement -20 °C ~ +70 °C
La température de stockage -30 °C ~ +80 °C
Humidité de stockage 20 ~ 90% RH
Conformité RoHS
Bon de livraison Customized module with customer-matched cover glass and interface configuration
Test et vérification
Article d'essai État
stockage à haute température 80 +/- 2 degC x 96 hours
stockage à basse température -30 +/- 2 degC x 96 hours
Fonctionnement à haute température 70 +/- 2 degC x 96 hours
Low temperature operating -20 +/- 2 degC x 96 hours
Thermal cycle (storage) -20 degC (30 min) / 25 degC (5 min) / 70 degC (30 min), 10 cycles
Damp proof test (storage) 50 +/- 5 degC, 90% RH x 96 hours
Test de vibration 10 Hz - 55 Hz - 10 Hz, amplitude 1.5 mm, X / Y / Z axes, 3 hours total (packing condition)
Test de chute 1 m drop, one time per carton side (packing condition)
Test d'ESD +/- 8 kV, air mode, 10 times
Acceptance after each test: no air bubbles in the LCD, no seal leak, no non-display or missing segments, no glass crack, current within twice the initial value, surface free from damage, and electrical characteristics within specification. Outgoing inspection follows MIL-STD-105D Level II sampling with AQL limits defined for major and minor defects.
Résultats du projet
Résultats du projet
Résultats du projet
Résultats du projet
Résultats du projet

— Project Results

  • The customized configuration was frozen as a released specification (V0) covering the display, touch stack, interface and mechanical outline, so the module can be reordered against a controlled document.
  • The module passed the full reliability sequence above, including 96-hour high and low temperature storage, 96-hour operating tests, 10 thermal cycles, damp proof testing, vibration, carton drop and +/- 8 kV air discharge ESD.
  • Material selection complies with RoHS, which the customer's product compliance file requires.
  • The same 4.3-inch touch display platform is also used in other equipment categories, which keeps the supply chain and the engineering base common across products.

Témoignages des clients

"The touchscreen is operated continuously during a live session, so responsiveness is not a nice-to-have.

The panel keeps up with fast tapping over hours of use, and we have not had touch complaints from users."

Gestionnaire de produit
Gestionnaire de produit
fabricant d'équipements de diffusion en direct

"We mount this panel in landscape, and the full viewing angle is what makes it work:

the interface stays readable whether the user is standing at the terminal or watching from the side."

Ingénieur Hardware
Ingénieur Hardware
l'électronique grand public
"The cover glass was made to our outline, so the display sits flush in the front panel without a separate bezel. That saved us a tooling change."
Le concepteur industriel ;
Le concepteur industriel ;
appareils de diffusion en direct

Affaires connexes

No related cases.

Prêt à personnaliser votre module LCD ? Construisons-le ensemble.

Dites-nous vos exigences — taille, interface, luminosité, toucher ou autre — et notre équipe vous fournira une solution sur mesure avec une assistance rapide et des prix directement en usine.

Contactez-nous pour un devis et une consultation gratuite.

CONTACTEZ-NOUS

Demander un Soumission

*Nous respectons votre vie privée. Lorsque vous nous fournissez vos coordonnées, nous nous engageons à vous contacter uniquement conformément à nos Pour en savoir plus, veuillez consulter notre politique de confidentialité.

Nous accordons une grande importance à votre vie privée

Nous utilisons des cookies pour améliorer votre expérience de navigation, vous proposer des publicités ou du contenu personnalisés et analyser notre trafic. En cliquant sur « Accepter tout », vous consentez à notre utilisation de cookies.