Outdoor Digital Billboard High-Brightness Display Case

Outdoor Digital Billboard High-Brightness Display Case

プロジェクト紹介

Industry / Application: Outdoors Digital Billboard

顧客タイプ: Outdoor Advertising Media Company

プロジェクトの規模: 15 sets of full-laminated high-brightness display modules

顧客の悩み: The previous ordinary LCD modules were easily washed out by sunlight, hard to read outdoors, and their service life was short. High-temperature operation also caused the modules to burn out frequently, leading to after-sales problems.

Demo – Outdoor Billboard Case

プロジェクトの詳細

クライアントの背景

— Client Background

The customer operates outdoor advertising screens installed along busy streets and commercial districts. The displays run continuously in full sunlight, exposed to high temperatures, UV radiation, wind, rain and condensation.

The previous supplier used ordinary commercial LCD panels that were not designed for outdoor use. The images faded in bright sun, polarizer layers aged quickly under heat, and several screens failed within the first year of operation.

— Solution Provided

01
Touch display matched to the terminal's landscape layout
A 4.3-inch IPS TFT panel with 480 x 800 resolution, 16.7M colors and 80/80/80/80 viewing direction. The panel is a portrait-format part that is mounted in landscape orientation in the streaming terminal, so the interface stays readable from the operator's position and from the audience side of the device.
02
Capacitive touch built for continuous operation
A G+F+F capacitive touch stack with a 0.7 mm cover lens, 6H surface hardness and transmittance of 87% or above, delivering the scratch resistance and light transmission required by a device that is touched for hours at a time.
03
Compact high-speed interface
A 2-lane MIPI DSI interface keeps the pin count low while supporting the 480 x 800 resolution, which simplifies the FPC and the connector layout inside a slim consumer terminal.
04
カスタマイズされた機械的統合
Module size of 66.26 x 113.9 x 3.35 mm with an active area of 56.16 x 93.6 mm; the cover glass outline, printing and interface configuration are matched to the customer's product so the display integrates into the existing front panel.
05
Environmental and reliability design
Operating temperature -20 degC to +70 degC, storage -30 degC to +80 degC, 8 white LED serial backlight, and RoHS-compliant material selection.

— Final Delivery

Product parameters and delivery specifications
製品仕様
モジュール番号 CH430WV15A-CT
液晶タイプ 4.3-inch TFT with capacitive touch
ドット配置 480 x (RGB) x 800 dots
色 16.7M
ディスプレイモード IPS / 透過型 / 通常黒
見る方向 80/80/80/80 (ALL)
コントラスト比 800:1
モジュールサイズ 6.26 (W) x 113.9 (H) x 3.35 (T) mm
アクティブエリア 56.16(幅)×93.6(高さ)mm
ドットピッチ 0.117 x 0.117 mm
インタフェース 2車線MIPI DSI
タッチ式 Capacitive, G+F+F, I2C interface
タッチ面 Cover lens 0.7 mm, hardness 6H, transmittance 87% or above
バックライト 8 white LEDs in serial; typical 300 cd/m2, uniformity 80%
動作温度 -20℃~+70℃
貯蔵温度 -30℃~+80℃
保存湿度 20〜90%RH
コンプライアンス RoHS指令
配送フォーム Customized module with customer-matched cover glass and interface configuration
テストと検証
テスト項目 状態
高温保管 80 +/- 2 degC x 96 hours
低温保管 -30 +/- 2 degC x 96 hours
高温動作 70 +/- 2 degC x 96 hours
Low temperature operating -20 +/- 2 degC x 96 hours
Thermal cycle (storage) -20 degC (30 min) / 25 degC (5 min) / 70 degC (30 min), 10 cycles
Damp proof test (storage) 50 +/- 5 degC, 90% RH x 96 hours
振動試験 10 Hz - 55 Hz - 10 Hz, amplitude 1.5 mm, X / Y / Z axes, 3 hours total (packing condition)
落下試験 1 m drop, one time per carton side (packing condition)
ESD試験 +/- 8 kV, air mode, 10 times
Acceptance after each test: no air bubbles in the LCD, no seal leak, no non-display or missing segments, no glass crack, current within twice the initial value, surface free from damage, and electrical characteristics within specification. Outgoing inspection follows MIL-STD-105D Level II sampling with AQL limits defined for major and minor defects.
プロジェクトの成果
プロジェクトの成果
プロジェクトの成果
プロジェクトの成果
プロジェクトの成果

— Project Results

  • The customized configuration was frozen as a released specification (V0) covering the display, touch stack, interface and mechanical outline, so the module can be reordered against a controlled document.
  • The module passed the full reliability sequence above, including 96-hour high and low temperature storage, 96-hour operating tests, 10 thermal cycles, damp proof testing, vibration, carton drop and +/- 8 kV air discharge ESD.
  • Material selection complies with RoHS, which the customer's product compliance file requires.
  • The same 4.3-inch touch display platform is also used in other equipment categories, which keeps the supply chain and the engineering base common across products.

お客様の声

"The touchscreen is operated continuously during a live session, so responsiveness is not a nice-to-have.

The panel keeps up with fast tapping over hours of use, and we have not had touch complaints from users."

Product Manager
Product Manager
ライブストリーミング機器メーカー

"We mount this panel in landscape, and the full viewing angle is what makes it work:

the interface stays readable whether the user is standing at the terminal or watching from the side."

ハードウェア技術者
ハードウェア技術者
家電
"The cover glass was made to our outline, so the display sits flush in the front panel without a separate bezel. That saved us a tooling change."
工業デザイナー
工業デザイナー
ライブストリーミングデバイス

関連するケース

No related cases.

LCD モジュールをカスタマイズする準備はできましたか? 一緒に構築しましょう。

サイズ、インターフェース、明るさ、タッチなど、お客様のご要望をお聞かせください。当社のチームが迅速なサポートと工場直販価格でカスタマイズされたソリューションをご提供します。

無料のお見積りとご相談はお気軽にお問い合わせください。

お問い合わせ

リクエストA 見積もり

*当社はお客様のプライバシーを尊重します。連絡先情報をご提供いただいた場合、当社は当社の定める方法に従ってのみお客様にご連絡することに同意するものとします。 個人情報保護方針

私たちはあなたのプライバシーを大切にします

当社は、お客様のブラウジング体験の向上、パーソナライズされた広告やコンテンツの提供、トラフィックの分析のために Cookie を使用します。[すべて承認] をクリックすると、Cookie の使用に同意したことになります。