Demo – Marine LCD Solution

Demo – Marine LCD Solution

Priemyselný dopyt

Commercial and leisure vessels are moving toward integrated glass-bridge consoles, more on-board electronics and, on newer platforms, electric and hybrid propulsion. As a result, the number of displays on a vessel keeps growing: bridge navigation and chartplotter screens, radar and sonar repeaters, engine-room monitoring panels, thruster and winch control stations, AIS and communication terminals, and fuel, bilge or tank level gauges.

These displays live outdoors or in semi-exposed positions. They work under direct solar radiation, in salt fog and high humidity, across ambient temperatures from around -20 degC to +55 degC with cover-glass surface temperatures reaching 90 degC in strong sun, and under continuous hull and engine vibration.

Priemyselný dopyt

Priemyselné body bolesti

Sunlight washout and mirror reflection. Standard panels at 200-700 cd/m2 become unreadable in direct sun, and polished cover glass turns the screen into a mirror at the helm.
-01

Polarized sunglasses extinction

LCD output is linearly polarized. When the sunglasses axis crosses the screen axis, the display darkens or goes completely black; rotating the polarizer only moves the problem to another installation angle.
-02

Solar thermal load on the laminated stack.

Coated glass, OCA and polarizer are exposed to strong infrared and ultraviolet radiation, so ordinary consumer-grade OCA whitens, hazes, bubbles or delaminates.
-03

Wide temperature and condensation

Response slows in cold conditions, contrast drops when hot, and sealed enclosures can fog internally behind the cover glass.
-04

Salt fog, humidity and mold

Corrosion, conductive residue and optical degradation shorten service life on deck and in engine spaces.
-05

Vibration, shock and EMC

Constant hull vibration loosens FPCs and connectors, while radar, VHF and inverter equipment inject interference that shows up as flicker or image noise.
-06

Night-time luminance control

A screen bright enough for noon is blinding on the night watch; crews need a wide, flicker-free dimming range.
-07

Dôkaz o certifikácii

System-level approvals need display-level test reports, and most module suppliers do not provide them.
-08

Long service life and retrofit fit

Vessels stay in service for a decade or more, so replacement displays must drop into existing cutouts, interfaces and mounting holes.

Technické riešenie

Technické riešenie
High-brightness sunlight-readable modules with AG / AR / AF cover glass. Backlight designs from 1,000 cd/m2 up to 3,500 cd/m2, combined with anti-glare (AG) surface treatment, anti-reflection (AR) coating and anti-fingerprint (AF) finish.

Optical full lamination

Vacuum lamination plus autoclave process bonds the cover glass to the panel with no air gap, eliminating internal fogging, removing extra reflective interfaces, raising contrast and improving impact resistance.

Marine-grade optical adhesive

Vacuum lamination plus autoclave process bonds the cover glass to the panel with no air gap, eliminating internal fogging, removing extra reflective interfaces, raising contrast and improving impact resistance.

Quarter-wave plate (QWP) polarizer

Vacuum lamination plus autoclave process bonds the cover glass to the panel with no air gap, eliminating internal fogging, removing extra reflective interfaces, raising contrast and improving impact resistance.

Dizajn pre široký rozsah teplôt

Vacuum lamination plus autoclave process bonds the cover glass to the panel with no air gap, eliminating internal fogging, removing extra reflective interfaces, raising contrast and improving impact resistance.

Waterproof and vibration-resistant mechanics

Vacuum lamination plus autoclave process bonds the cover glass to the panel with no air gap, eliminating internal fogging, removing extra reflective interfaces, raising contrast and improving impact resistance.

EMC control and flicker-free dimming

Vacuum lamination plus autoclave process bonds the cover glass to the panel with no air gap, eliminating internal fogging, removing extra reflective interfaces, raising contrast and improving impact resistance.

Overenie treťou stranou

Vacuum lamination plus autoclave process bonds the cover glass to the panel with no air gap, eliminating internal fogging, removing extra reflective interfaces, raising contrast and improving impact resistance.

Výhody riešenia

Vysoko spoľahlivý dizajn

Vysoko spoľahlivý dizajn

Wide temperature range, salt-fog and humidity resistance, vibration-tolerant mechanics and EMC-controlled signal routing, verified on the fully laminated module in the delivery condition.
High-resolution clear display

High-resolution clear display

IPS panels with full viewing angle, high contrast and 262K colors and above, readable from any position at the helm.
Low-power technology

Low-power technology

High-efficiency LED backlights with wide-range DC dimming; brightness follows ambient light, so average power consumption stays low.
Služba prispôsobenia

Služba prispôsobenia

Size, brightness, cover glass (AG/AR/AF), touch, FPC pinout, interface, heater and mechanical outline are configurable, with engineering support through to mass production.

Súvisiace produkty

Aplikačné scenáre

Bridge navigation and chartplotter consoles
Bridge navigation and chartplotter consoles
Primary helm displays that must stay readable in daylight and dim smoothly at night.
Zobraziť viac>
Engine-room monitoring panels.
Engine-room monitoring panels.
Long-duty displays working under industrial lighting and continuous vibration.
Zobraziť viac>
Open-deck control stations
Open-deck control stations
Winch, thruster and docking controls exposed to direct sun, salt spray and wash-down.
Zobraziť viac>
Yacht helm and flybridge displays
Yacht helm and flybridge displays
Compact sunlight-readable panels that remain clear through polarized sunglasses.
Zobraziť viac>
Port and marina equipment
Port and marina equipment
Bollard controls, gangway and shore-power stations running outdoors around the clock.
Zobraziť viac>
AIS, communication and sonar repeater terminals
AIS, communication and sonar repeater terminals
Information displays that must stay legible and reliable over long service intervals.
Zobraziť viac>

Ohlasy zákazníkov

"The touchscreen is operated continuously during a live session, so responsiveness is not a nice-to-have.

The panel keeps up with fast tapping over hours of use, and we have not had touch complaints from users."

Product Manager
Product Manager
live streaming equipment manufacturer

"We mount this panel in landscape, and the full viewing angle is what makes it work:

the interface stays readable whether the user is standing at the terminal or watching from the side."

Hardvérový inžinier
Hardvérový inžinier
spotrebnej elektroniky
"The cover glass was made to our outline, so the display sits flush in the front panel without a separate bezel. That saved us a tooling change."
Priemyselný dizajnér
Priemyselný dizajnér
live streaming devices

Často kladené otázky

Aké je minimálne objednané množstvo (MOQ) pre LCD displeje na mieru?

Pre väčšinu projektov na mieru sa minimálne objednávacie množstvo pohybuje od 200 do 500 kusov v závislosti od zložitosti a použitých komponentov. V prípade dlhodobej spolupráce alebo strategických zákazníkov sme flexibilní. Pred hromadnou výrobou sú vždy vítané vzorkové objednávky.

Ako dlho trvá dokončenie projektu LCD displeja na mieru?

Návrh riešenia: 1–3 pracovné dni

Vývoj vzorky: 7–10 pracovných dní (v závislosti od zložitosti)

Hromadná výroba: 2–4 týždne

Celý cyklus od konceptu až po dodanie je zvyčajne 3 – 6 týždňov.

Môžem získať technickú podporu počas vývoja a po dodaní?

Áno. Naši inžinieri poskytujú individuálnu technickú podporu vrátane pomoci s návrhom rozhrania, odporúčaní pre integrované obvody ovládačov, podpory rozloženia FPC a riešenia problémov – pred projektom, počas neho aj po ňom.

Ponúkate prispôsobenie displeja aj dotykového panela?

Rozhodne. Podporujeme úplnú úpravu TFT LCD displejových modulov aj kapacitných alebo rezistívnych dotykových panelov vrátane tvaru, hrúbky, spôsobu lepenia (OCA/vzduchová medzera), rozhrania, potlače krycej šošovky a ďalších parametrov.

Sú vaše displeje v súlade s medzinárodnými normami?

Áno. Všetky naše produkty spĺňajú medzinárodné normy kvality a bezpečnosti vrátane RoHS, REACH, UL a CE. Sme certifikovaní podľa noriem ISO9001, ISO14001 a IATF16949, čo zabezpečuje prísnu kontrolu kvality počas celej výroby.

Akú záruku poskytujete na vlastné zobrazovacie moduly?

Na všetky LCD produkty na mieru ponúkame štandardnú 12-mesačnú záruku, ktorá pokrýva výrobné chyby. Pre dlhodobé projekty spolupráce je k dispozícii rozšírená podpora.

Viete pomôcť s balením a prepravou zahraničných objednávok?

Áno. Poskytujeme balenie na mieru na ochranu citlivých modulov počas prepravy a podporujeme medzinárodnú prepravu prostredníctvom DHL, FedEx, UPS alebo prepravných spoločností podľa vášho výberu. Súčasťou je exportná dokumentácia a kódy HS.

Čo ak sa v budúcnosti prestane vyrábať jeden z kľúčových komponentov (ako napríklad integrovaný obvod ovládača)?

Zabezpečujeme plánovanie životného cyklu a stabilnú správu kusovníkov, čo znamená, že vyberáme dlhodobo dostupné komponenty a vopred informujeme zákazníkov o potrebe ich výmeny – čím zabezpečujeme plynulé dodávky dlhodobo používaných produktov.

Ste pripravení prispôsobiť si LCD modul? Poďme ho zostaviť spolu.

Povedzte nám svoje požiadavky – veľkosť, rozhranie, jas, dotyk alebo čokoľvek iné – a náš tím vám poskytne riešenie na mieru s rýchlou podporou a cenami priamo od výrobcu.

Kontaktujte nás pre bezplatnú cenovú ponuku a konzultáciu.

KONTAKTUJTE NÁS

Žiadosť A Cena

*Rešpektujeme vaše súkromie. Keď nám poskytnete svoje kontaktné údaje, súhlasíme s tým, že vás budeme kontaktovať iba v súlade s našimi Zásady ochrany osobných údajov.

Ceníme si vaše súkromie

Súbory cookie používame na zlepšenie vášho zážitku z prehliadania, poskytovanie prispôsobených reklám alebo obsahu a analýzu našej návštevnosti. Kliknutím na „Prijať všetko“ súhlasíte s naším používaním súborov cookie.