Demo – Marine LCD Solution

Demo – Marine LCD Solution

Industriens etterspørsel

Commercial and leisure vessels are moving toward integrated glass-bridge consoles, more on-board electronics and, on newer platforms, electric and hybrid propulsion. As a result, the number of displays on a vessel keeps growing: bridge navigation and chartplotter screens, radar and sonar repeaters, engine-room monitoring panels, thruster and winch control stations, AIS and communication terminals, and fuel, bilge or tank level gauges.

These displays live outdoors or in semi-exposed positions. They work under direct solar radiation, in salt fog and high humidity, across ambient temperatures from around -20 degC to +55 degC with cover-glass surface temperatures reaching 90 degC in strong sun, and under continuous hull and engine vibration.

Industriens etterspørsel

Industriens smertepunkter

Sunlight washout and mirror reflection. Standard panels at 200-700 cd/m2 become unreadable in direct sun, and polished cover glass turns the screen into a mirror at the helm.
-01

Polarized sunglasses extinction

LCD output is linearly polarized. When the sunglasses axis crosses the screen axis, the display darkens or goes completely black; rotating the polarizer only moves the problem to another installation angle.
-02

Solar thermal load on the laminated stack.

Coated glass, OCA and polarizer are exposed to strong infrared and ultraviolet radiation, so ordinary consumer-grade OCA whitens, hazes, bubbles or delaminates.
-03

Wide temperature and condensation

Response slows in cold conditions, contrast drops when hot, and sealed enclosures can fog internally behind the cover glass.
-04

Salt fog, humidity and mold

Corrosion, conductive residue and optical degradation shorten service life on deck and in engine spaces.
-05

Vibration, shock and EMC

Constant hull vibration loosens FPCs and connectors, while radar, VHF and inverter equipment inject interference that shows up as flicker or image noise.
-06

Night-time luminance control

A screen bright enough for noon is blinding on the night watch; crews need a wide, flicker-free dimming range.
-07

Sertifiseringsbevis

System-level approvals need display-level test reports, and most module suppliers do not provide them.
-08

Long service life and retrofit fit

Vessels stay in service for a decade or more, so replacement displays must drop into existing cutouts, interfaces and mounting holes.

Teknisk løsning

Teknisk løsning
High-brightness sunlight-readable modules with AG / AR / AF cover glass. Backlight designs from 1,000 cd/m2 up to 3,500 cd/m2, combined with anti-glare (AG) surface treatment, anti-reflection (AR) coating and anti-fingerprint (AF) finish.

Optical full lamination

Vacuum lamination plus autoclave process bonds the cover glass to the panel with no air gap, eliminating internal fogging, removing extra reflective interfaces, raising contrast and improving impact resistance.

Marine-grade optical adhesive

Vacuum lamination plus autoclave process bonds the cover glass to the panel with no air gap, eliminating internal fogging, removing extra reflective interfaces, raising contrast and improving impact resistance.

Quarter-wave plate (QWP) polarizer

Vacuum lamination plus autoclave process bonds the cover glass to the panel with no air gap, eliminating internal fogging, removing extra reflective interfaces, raising contrast and improving impact resistance.

Wide-temperature design

Vacuum lamination plus autoclave process bonds the cover glass to the panel with no air gap, eliminating internal fogging, removing extra reflective interfaces, raising contrast and improving impact resistance.

Waterproof and vibration-resistant mechanics

Vacuum lamination plus autoclave process bonds the cover glass to the panel with no air gap, eliminating internal fogging, removing extra reflective interfaces, raising contrast and improving impact resistance.

EMC control and flicker-free dimming

Vacuum lamination plus autoclave process bonds the cover glass to the panel with no air gap, eliminating internal fogging, removing extra reflective interfaces, raising contrast and improving impact resistance.

Tredjepartsverifisering

Vacuum lamination plus autoclave process bonds the cover glass to the panel with no air gap, eliminating internal fogging, removing extra reflective interfaces, raising contrast and improving impact resistance.

Løsningsfordeler

Design med høy pålitelighet

Design med høy pålitelighet

Wide temperature range, salt-fog and humidity resistance, vibration-tolerant mechanics and EMC-controlled signal routing, verified on the fully laminated module in the delivery condition.
High-resolution clear display

High-resolution clear display

IPS panels with full viewing angle, high contrast and 262K colors and above, readable from any position at the helm.
Low-power technology

Low-power technology

High-efficiency LED backlights with wide-range DC dimming; brightness follows ambient light, so average power consumption stays low.
Tilpasningstjeneste

Tilpasningstjeneste

Size, brightness, cover glass (AG/AR/AF), touch, FPC pinout, interface, heater and mechanical outline are configurable, with engineering support through to mass production.

Relaterte produkter

Applikasjonsscenarier

Bridge navigation and chartplotter consoles
Bridge navigation and chartplotter consoles
Primary helm displays that must stay readable in daylight and dim smoothly at night.
Vis mer>
Engine-room monitoring panels.
Engine-room monitoring panels.
Long-duty displays working under industrial lighting and continuous vibration.
Vis mer>
Open-deck control stations
Open-deck control stations
Winch, thruster and docking controls exposed to direct sun, salt spray and wash-down.
Vis mer>
Yacht helm and flybridge displays
Yacht helm and flybridge displays
Compact sunlight-readable panels that remain clear through polarized sunglasses.
Vis mer>
Port and marina equipment
Port and marina equipment
Bollard controls, gangway and shore-power stations running outdoors around the clock.
Vis mer>
AIS, communication and sonar repeater terminals
AIS, communication and sonar repeater terminals
Information displays that must stay legible and reliable over long service intervals.
Vis mer>

Kundevurderinger

"The touchscreen is operated continuously during a live session, so responsiveness is not a nice-to-have.

The panel keeps up with fast tapping over hours of use, and we have not had touch complaints from users."

Product Manager
Product Manager
live streaming equipment manufacturer

"We mount this panel in landscape, and the full viewing angle is what makes it work:

the interface stays readable whether the user is standing at the terminal or watching from the side."

Maskinvare ingeniør
Maskinvare ingeniør
forbrukerelektronikk
"The cover glass was made to our outline, so the display sits flush in the front panel without a separate bezel. That saved us a tooling change."
Industriell designer
Industriell designer
live streaming devices

FAQ

Hva er minimumsbestillingsmengden (MOQ) for tilpassede LCD-skjermer?

For de fleste tilpassede prosjekter varierer MOQ fra 200 til 500 deler, avhengig av kompleksiteten og komponentene som er involvert. For langsiktig samarbeid eller strategiske kunder kan vi være fleksible. Prøvebestillinger er alltid velkomne før masseproduksjon.

Hvor lang tid tar det å fullføre et tilpasset LCD-prosjekt?

Løsningsforslag: 1–3 virkedager

Prøveutvikling: 7–10 virkedager (avhengig av kompleksitet)

Masseproduksjon: 2–4 uker

Hele syklusen fra konsept til levering er vanligvis 3–6 uker.

Kan jeg få teknisk støtte under utvikling og etter levering?

Ja. Våre ingeniører tilbyr teknisk støtte én-til-én, inkludert assistanse med grensesnittdesign, anbefalinger for driver-IC, støtte for FPC-layout og feilsøking – før, under og etter prosjektet.

Tilbyr dere tilpasning for både skjerm og berøringspanel?

Absolutt. Vi støtter full tilpasning av både TFT LCD-skjermmoduler og kapasitive eller resistive berøringspaneler, inkludert form, tykkelse, bindingsmetode (OCA/luftgap), grensesnitt, trykk på deksellinser og mer.

Er skjermene deres i samsvar med internasjonale standarder?

Ja. Alle produktene våre oppfyller internasjonale kvalitets- og sikkerhetsstandarder, inkludert RoHS, REACH, UL og CE. Vi er sertifisert i henhold til ISO9001, ISO14001 og IATF16949, noe som sikrer streng kvalitetskontroll gjennom hele produksjonen.

Hvilken garanti tilbyr dere for tilpassede skjermmoduler?

Vi tilbyr en standard 12-måneders garanti for alle spesialtilpassede LCD-produkter, som dekker produksjonsfeil. Utvidet støtte er tilgjengelig for langsiktige samarbeidsprosjekter.

Kan dere hjelpe med pakking og frakt for utenlandsbestillinger?

Ja. Vi tilbyr spesialtilpasset emballasje for å beskytte sensitive moduler under transport og støtter internasjonal frakt via DHL, FedEx, UPS eller speditører du velger. Eksportdokumentasjon og HS-koder er inkludert.

Hva om en av nøkkelkomponentene (som driver-IC) utgår i fremtiden?

Vi tilbyr livssyklusplanlegging og stabil stykklistehåndtering, som betyr at vi velger komponenter som er tilgjengelige på lang sikt og varsler kundene på forhånd hvis det er behov for utskifting – noe som sikrer jevn forsyning av produkter som har lang levetid.

Klar til å tilpasse LCD-modulen din? La oss bygge den sammen.

Fortell oss dine krav – størrelse, grensesnitt, lysstyrke, berøringsskjerm eller hva som helst annet – så vil teamet vårt tilby en skreddersydd løsning med rask støtte og fabrikk-direkte priser.

Kontakt oss for et gratis pristilbud og en konsultasjon.

Kontakt oss

Forespørsel A Premie

*Vi respekterer personvernet ditt. Når du sender inn kontaktinformasjonen din, samtykker vi i å kun kontakte deg i samsvar med våre Personvern.

Vi verdsetter personvernet ditt

Vi bruker informasjonskapsler for å forbedre nettleseropplevelsen din, vise personlig tilpassede annonser eller innhold og analysere trafikken vår. Ved å klikke "Godta alle", samtykker du til vår bruk av informasjonskapsler.