Demo – Marine LCD Application

Demo – Marine LCD Application

Industrins efterfrågan

Commercial and leisure vessels are moving toward integrated glass-bridge consoles, more on-board electronics and, on newer platforms, electric and hybrid propulsion. As a result, the number of displays on a vessel keeps growing: bridge navigation and chartplotter screens, radar and sonar repeaters, engine-room monitoring panels, thruster and winch control stations, AIS and communication terminals, and fuel, bilge or tank level gauges.

These displays live outdoors or in semi-exposed positions. They work under direct solar radiation, in salt fog and high humidity, across ambient temperatures from around -20 degC to +55 degC with cover-glass surface temperatures reaching 90 degC in strong sun, and under continuous hull and engine vibration.

Industrins efterfrågan

Smärtpunkter för industrin

Sunlight washout and mirror reflection. Standard panels at 200-700 cd/m2 become unreadable in direct sun, and polished cover glass turns the screen into a mirror at the helm.
-01

Polarized sunglasses extinction

LCD output is linearly polarized. When the sunglasses axis crosses the screen axis, the display darkens or goes completely black; rotating the polarizer only moves the problem to another installation angle.
-02

Solar thermal load on the laminated stack.

Coated glass, OCA and polarizer are exposed to strong infrared and ultraviolet radiation, so ordinary consumer-grade OCA whitens, hazes, bubbles or delaminates.
-03

Wide temperature and condensation

Response slows in cold conditions, contrast drops when hot, and sealed enclosures can fog internally behind the cover glass.
-04

Salt fog, humidity and mold

Corrosion, conductive residue and optical degradation shorten service life on deck and in engine spaces.
-05

Vibration, shock and EMC

Constant hull vibration loosens FPCs and connectors, while radar, VHF and inverter equipment inject interference that shows up as flicker or image noise.
-06

Night-time luminance control

A screen bright enough for noon is blinding on the night watch; crews need a wide, flicker-free dimming range.
-07

Certifieringsbevis

System-level approvals need display-level test reports, and most module suppliers do not provide them.
-08

Long service life and retrofit fit

Vessels stay in service for a decade or more, so replacement displays must drop into existing cutouts, interfaces and mounting holes.

Teknisk lösning

Teknisk lösning
High-brightness sunlight-readable modules with AG / AR / AF cover glass. Backlight designs from 1,000 cd/m2 up to 3,500 cd/m2, combined with anti-glare (AG) surface treatment, anti-reflection (AR) coating and anti-fingerprint (AF) finish.

Optical full lamination

Vacuum lamination plus autoclave process bonds the cover glass to the panel with no air gap, eliminating internal fogging, removing extra reflective interfaces, raising contrast and improving impact resistance.

Marine-grade optical adhesive

Vacuum lamination plus autoclave process bonds the cover glass to the panel with no air gap, eliminating internal fogging, removing extra reflective interfaces, raising contrast and improving impact resistance.

Quarter-wave plate (QWP) polarizer

Vacuum lamination plus autoclave process bonds the cover glass to the panel with no air gap, eliminating internal fogging, removing extra reflective interfaces, raising contrast and improving impact resistance.

Bred temperaturdesign

Vacuum lamination plus autoclave process bonds the cover glass to the panel with no air gap, eliminating internal fogging, removing extra reflective interfaces, raising contrast and improving impact resistance.

Waterproof and vibration-resistant mechanics

Vacuum lamination plus autoclave process bonds the cover glass to the panel with no air gap, eliminating internal fogging, removing extra reflective interfaces, raising contrast and improving impact resistance.

EMC control and flicker-free dimming

Vacuum lamination plus autoclave process bonds the cover glass to the panel with no air gap, eliminating internal fogging, removing extra reflective interfaces, raising contrast and improving impact resistance.

Tredjepartsverifiering

Vacuum lamination plus autoclave process bonds the cover glass to the panel with no air gap, eliminating internal fogging, removing extra reflective interfaces, raising contrast and improving impact resistance.

Lösningsfördelar

Hög tillförlitlig design

Hög tillförlitlig design

Wide temperature range, salt-fog and humidity resistance, vibration-tolerant mechanics and EMC-controlled signal routing, verified on the fully laminated module in the delivery condition.
High-resolution clear display

High-resolution clear display

IPS panels with full viewing angle, high contrast and 262K colors and above, readable from any position at the helm.
Low-power technology

Low-power technology

High-efficiency LED backlights with wide-range DC dimming; brightness follows ambient light, so average power consumption stays low.
Anpassningstjänst

Anpassningstjänst

Size, brightness, cover glass (AG/AR/AF), touch, FPC pinout, interface, heater and mechanical outline are configurable, with engineering support through to mass production.

Liknande produkter...

Applikationsscenarier

Bridge navigation and chartplotter consoles
Bridge navigation and chartplotter consoles
Primary helm displays that must stay readable in daylight and dim smoothly at night.
Visa mer>
Engine-room monitoring panels.
Engine-room monitoring panels.
Long-duty displays working under industrial lighting and continuous vibration.
Visa mer>
Open-deck control stations
Open-deck control stations
Winch, thruster and docking controls exposed to direct sun, salt spray and wash-down.
Visa mer>
Yacht helm and flybridge displays
Yacht helm and flybridge displays
Compact sunlight-readable panels that remain clear through polarized sunglasses.
Visa mer>
Port and marina equipment
Port and marina equipment
Bollard controls, gangway and shore-power stations running outdoors around the clock.
Visa mer>
AIS, communication and sonar repeater terminals
AIS, communication and sonar repeater terminals
Information displays that must stay legible and reliable over long service intervals.
Visa mer>

Kundomdömen

"The touchscreen is operated continuously during a live session, so responsiveness is not a nice-to-have.

The panel keeps up with fast tapping over hours of use, and we have not had touch complaints from users."

Produktchef
Produktchef
live streaming equipment manufacturer

"We mount this panel in landscape, and the full viewing angle is what makes it work:

the interface stays readable whether the user is standing at the terminal or watching from the side."

Hårdvara Engineer
Hårdvara Engineer
hemelektronik
"The cover glass was made to our outline, so the display sits flush in the front panel without a separate bezel. That saved us a tooling change."
Industri designer
Industri designer
enheter för livestreaming

FAQ

Vad är den minsta orderkvantiteten (MOQ) för anpassade LCD-skärmar?

För de flesta kundanpassade projekt varierar MOQ:n från 200 till 500 stycken, beroende på komplexitet och komponenter. För långsiktigt samarbete eller strategiska kunder kan vi vara flexibla. Provbeställningar är alltid välkomna före massproduktion.

Hur lång tid tar det att slutföra ett anpassat LCD-projekt?

Lösningsförslag: 1–3 arbetsdagar

Provutveckling: 7–10 arbetsdagar (beroende på komplexitet)

Massproduktion: 2–4 veckor

Hela cykeln från koncept till leverans är vanligtvis 3–6 veckor.

Kan jag få teknisk support under utveckling och efter leverans?

Ja. Våra ingenjörer erbjuder teknisk support individuellt, inklusive hjälp med gränssnittsdesign, rekommendationer för drivrutins-IC, support för FPC-layout och felsökning – före, under och efter projektet.

Erbjuder ni anpassning för både display och pekskärm?

Absolut. Vi stöder fullständig anpassning av både TFT LCD-displaymoduler och kapacitiva eller resistiva pekskärmar, inklusive form, tjocklek, bindningsmetod (OCA/luftgap), gränssnitt, utskrift på täcklinsen och mer.

Överensstämmer era skärmar med internationella standarder?

Ja. Alla våra produkter uppfyller internationella kvalitets- och säkerhetsstandarder, inklusive RoHS, REACH, UL och CE. Vi är certifierade enligt ISO9001, ISO14001 och IATF16949, vilket säkerställer strikt kvalitetskontroll under hela produktionen.

Vilken garanti ger ni för anpassade displaymoduler?

Vi erbjuder 12 månaders standardgaranti för alla specialdesignade LCD-produkter, inklusive tillverkningsfel. Utökad support finns tillgänglig för långsiktiga samarbetsprojekt.

Kan ni hjälpa till med packning och frakt för utlandsbeställningar?

Ja. Vi tillhandahåller specialanpassade förpackningar för att skydda känsliga moduler under transport och stöder internationell frakt via DHL, FedEx, UPS eller speditörer som du väljer. Exportdokumentation och HS-koder ingår.

Vad händer om en av nyckelkomponenterna (som drivrutins-IC) utgår i framtiden?

Vi erbjuder livscykelplanering och stabil stycklistahantering, vilket innebär att vi väljer långsiktigt tillgängliga komponenter och meddelar kunderna i förväg om någon ersättning behövs – vilket säkerställer smidig leverans av produkter med lång livslängd.

Redo att anpassa din LCD-modul? Låt oss bygga den tillsammans.

Berätta dina krav – storlek, gränssnitt, ljusstyrka, pekskärm eller något annat – så kommer vårt team att tillhandahålla en skräddarsydd lösning med snabb support och fabriksbaserade priser.

Kontakta oss för en gratis offert och rådgivning.

KONTAKTA OSS

Begär A Offert

*Vi respekterar din integritet. När du skickar in din kontaktinformation samtycker vi till att endast kontakta dig i enlighet med vår Integritetspolicy.

Vi värdesätter din integritet

Vi använder cookies för att förbättra din webbupplevelse, visa personliga annonser eller innehåll och analysera vår trafik. Genom att klicka på "Acceptera alla" samtycker du till vår användning av cookies.